This state-of-the-art metal detector gives you the choice between 4 different frequencies so that you always search with the right frequency and do not miss the deeper targets anymore or search with a high frequency, for example, for maximum purity with small targets. The main and most special features are the 19 KHz search frequency, fully computer-controlled real-time ground balance using Ground Grab, screen display for type and amount of ground mineralization and very high quality audio metal indentification. The Makro Gold Racer is known as an easy to operate and adjustable metal detector. With this detector you can also find fine gold nuggets if you set the discrimination and sensitivity well, this takes some time but if it is good it is not very hard to find something. For those of you in a hurry, our choice for the Best Metal Detector For The Beach is the Garrett ACE 400.
The first question you should ask yourself before buying the best metal detector for beginners is what kind of treasure do you want to find? As you can see, the differences between the best metal detector for beginners and a model for advanced treasure hunters are significant. The first is how much time and mental energy is required to learn how to use a metal detector. Its light weight and automatic ground balance makes it a good choice for people who want to give metal detecting a try without feeling intimidated. 4 search modes to choose from depending on where you’re searching and what you’re searching for, including a beach mode that’s great for hunting in mineralized sand.
A $500 detector in the hands of an experienced operator is much more likely to find gold than a $5000 detector in the hands of a newbie. Understanding the language that your detector speaks is how gold prospectors really become successful. These pieces are certainly the exception rather than the rule, but there are pieces of gold out there that even the best pulse induction metal detectors will miss. While most VLF detectors reach maximum detectable depth at around 12″ or so, quality PI detectors have the ability to punch down several feet on a good sized target.
If your child is very small, then this metal detector may be the only one to fit them, but you might want to consider looking for a non-youth unit that is lightweight and can be shortened down to size. The features on the display include the standard discrimination, sensitivity and target indicator, along with a headphone jack. Though it excelled on our tests, this metal detector is actually the second cheapest model that we tested. This metal detector was at the top of our charts for all five of our tests.
Interchangeable Search Coils – Being able to change out the search coils helps when you’re searching for specific kinds of metals. When doing repetitive movements for hours at a time, the padding really shows its benefits. During long sessions of using the device, it keeps your arms from getting sore. Remember that all of this power needs to be paired with a coil that can handle the extra juice. High Operating Frequency – An average operating frequency is fine, but it is the high ones that really find the special metals.
However, the end result is usually the same and the results from two or more frequencies have to be compared in order to get information that typically cannot be had by analyzing only one single frequency by itself. Higher frequency detectors are over 30 kHz and are extremely sensitive to smaller items and low conductive metals. Low frequencies usually have single digit frequencies that are under 10 kHz and are good at finding highly conductive targets such as large metal items and coins.
You will also love the fact that this metal detector has a metal deep detecting mode. More to that, this metal detector comes with a 10×14 inches submersible search coil. The pinpointer function on this metal detector also allows you to home in directly on your desired target without having to search around a localized area for too long.
These are best if you’re serious about detecting and have the budget to back it up. Multi-frequency (MF) detectors are typically machines that go for over $1,000 and most commonly found in the high-end Minelab detectors. Very metal detecting low frequency (VLF) is the technology built into most detectors – pretty much any machine under $1,000. There are a few different technologies you should familiarize yourself with when choosing which detector to buy.